Cabinet Shell: Type 304 Stainless Steel cabinet with plastic top, base and upper front.

Drip Tray: High impact, UV protected polystyrene. Tray is easily removed for cleaning.

Faucets: Durable polypropylene. Self-closing. No drip. Child-resistant hot valve standard on SSRC-1H coolers.

Cold Water Reservoir: Type 304 stainless steel. External copper refrigerant coil. Reservoir insulation is a removable  polystyrene jacket. Temperature is
controlled by adjustable thermostat.

Cold Water Thermostat: Temperature is controlled by adjustable thermostat easily accessible through rear of cabinet.

Refrigeration Unit: Convection cooled condenser. Internally spring mounted, hermetically sealed compressor with automatic overload protector. No lubrication needed. Environmentally friendly R134a refrigerant is controlled by calibrated
capillary tube.

*Capacity: Cooler provides .5 G.P.H. (1.9 L.P.H.) of 50F (10C) water when room temperature and bottled water temperature are 90F (32.2C).

Hot Tank: Type 304 stainless steel. 500
Watt externally mounted band type heating element can be easily removed without draining the water from the cooler. Storage capacity is 1-1/2 quarts (1.4 liters)

Hot Water Thermostat: Automatic thermostat factory set at approximately 180F - 190F (82C - 88C). Hot tank
is protected by a heat limiter in the event of
a thermostat failure. A hot tank on/off switch located on the shelf is easily accessible from rear. An adjustable thermostat is also
available at extra cost.

Electrical: 115 Volts, 60 Hz. Compressor
HP: 1/20 full load. Amps: SSRC-1C 1.2; SSRC-1H 5.5. Removable three wire service cord and polarized plug furnished.

Net Weight (approx.): SSRC-1H: 32.5 lbs.

Shipping Weight: SSRC-1H 35.5 lbs.

Shipping Dimensions: 14" x 14" x 40 3/4" (355 mm x 355 mm x 1035 mm).